| Year |
Citation |
Score |
| 2020 |
Fathollahi S, Faulhammer E, Glasser BJ, Khinast JG. Impact of powder composition on processing-relevant properties of pharmaceutical materials: An experimental study Advanced Powder Technology. 31: 2991-3003. DOI: 10.1016/J.Apt.2020.05.027 |
0.475 |
|
| 2019 |
Grigorov PI, Muzzio FJ, Glasser BJ. Modeling fluidized bed impregnation of active pharmaceutical ingredients onto porous excipients Chemical Engineering Science. 202: 36-54. DOI: 10.1016/J.Ces.2019.02.029 |
0.421 |
|
| 2018 |
Chen H, Rustagi S, Diep E, Langrish TA, Glasser BJ. Scale-up of fluidized bed drying: Impact of process and design parameters Powder Technology. 339: 8-16. DOI: 10.1016/J.Powtec.2018.07.087 |
0.3 |
|
| 2018 |
Grigorov PI, Glasser BJ, Muzzio FJ. Cross-sectional analysis of impregnated excipient particles by energy dispersive X-ray spectroscopy Powder Technology. 332: 197-209. DOI: 10.1016/J.Powtec.2018.03.062 |
0.326 |
|
| 2018 |
Govender N, Rajamani R, Wilke DN, Wu C, Khinast J, Glasser BJ. Effect of particle shape in grinding mills using a GPU based DEM code Minerals Engineering. 129: 71-84. DOI: 10.1016/J.Mineng.2018.09.019 |
0.452 |
|
| 2018 |
Paredes IJ, Yohannes B, Emady HN, Muzzio FJ, Maglio A, Borghard WG, Glasser BJ, Cuitiño AM. Measurement of the residence time distribution of a cohesive powder in a flighted rotary kiln Chemical Engineering Science. 191: 56-66. DOI: 10.1016/J.Ces.2018.06.044 |
0.42 |
|
| 2018 |
Boonkanokwong V, Frank RP, Valliappan P, Remy B, Khinast JG, Glasser BJ. Flow of granular materials in a bladed mixer: Effect of particle properties and process parameters on impeller torque and power consumption Advanced Powder Technology. 29: 2733-2752. DOI: 10.1016/J.Apt.2018.07.022 |
0.797 |
|
| 2018 |
Govender N, Wilke DN, Wu C, Rajamani R, Khinast J, Glasser BJ. Large-scale GPU based DEM modeling of mixing using irregularly shaped particles Advanced Powder Technology. 29: 2476-2490. DOI: 10.1016/J.Apt.2018.06.028 |
0.461 |
|
| 2017 |
Wang Y, Li T, Muzzio FJ, Glasser BJ. Predicting feeder performance based on material flow properties Powder Technology. 308: 135-148. DOI: 10.1016/J.Powtec.2016.12.010 |
0.359 |
|
| 2017 |
Paredes IJ, Yohannes B, Emady H, Glasser BJ, Borghard WG, Muzzio F, Cuitiño AM, Beeckman J, Ilias S, Podsiadlo P, Jezek E, Baumgartner J. The effect of operating conditions on the residence time distribution and axial dispersion coefficient of a cohesive powder in a rotary kiln Chemical Engineering Science. 158: 50-57. DOI: 10.1016/J.Ces.2016.09.028 |
0.436 |
|
| 2017 |
Ebrahimi M, Siegmann E, Prieling D, Glasser BJ, Khinast JG. An investigation of the hydrodynamic similarity of single-spout fluidized beds using CFD-DEM simulations Advanced Powder Technology. 28: 2465-2481. DOI: 10.1016/J.Apt.2017.05.009 |
0.4 |
|
| 2016 |
Yohannes B, Emady H, Anderson K, Paredes I, Javed M, Borghard W, Muzzio FJ, Glasser BJ, Cuitiño AM. Scaling of heat transfer and temperature distribution in granular flows in rotating drums. Physical Review. E. 94: 042902. PMID 27841576 DOI: 10.1103/Physreve.94.042902 |
0.392 |
|
| 2016 |
Chen H, Liu X, Bishop C, Glasser BJ. Fluidized bed drying of a pharmaceutical powder: A parametric investigation of drying of dibasic calcium phosphate Drying Technology. 35: 1602-1618. DOI: 10.1080/07373937.2016.1265552 |
0.318 |
|
| 2016 |
Boonkanokwong V, Remy B, Khinast JG, Glasser BJ. The effect of the number of impeller blades on granular flow in a bladed mixer Powder Technology. 302: 333-349. DOI: 10.1016/J.Powtec.2016.08.064 |
0.825 |
|
| 2016 |
Wang Y, Koynov S, Glasser BJ, Muzzio FJ. A method to analyze shear cell data of powders measured under different initial consolidation stresses Powder Technology. 294: 105-112. DOI: 10.1016/J.Powtec.2016.02.027 |
0.322 |
|
| 2016 |
Adepu M, Hate S, Bétard A, Oka S, Schongut M, Sen M, Sood Y, Wolf D, Wieland S, Stepanek F, Muzzio F, Glasser B, Ramachandran R. Quantitative validation and analysis of the regime map approach for the wet granulation of industrially relevant zirconium hydroxide powders Powder Technology. 294: 177-184. DOI: 10.1016/J.Powtec.2016.02.026 |
0.315 |
|
| 2016 |
Koynov S, Wang Y, Redere A, Amin P, Emady HN, Muzzio FJ, Glasser BJ. Measurement of the axial dispersion coefficient of powders in a rotating cylinder: Dependence on bulk flow properties Powder Technology. 292: 298-306. DOI: 10.1016/J.Powtec.2016.01.039 |
0.523 |
|
| 2016 |
Emady HN, Anderson KV, Borghard WG, Muzzio FJ, Glasser BJ, Cuitino A. Prediction of conductive heating time scales of particles in a rotary drum Chemical Engineering Science. 152: 45-54. DOI: 10.1016/J.Ces.2016.05.022 |
0.336 |
|
| 2016 |
Koynov S, Muzzio FJ, Glasser BJ. A novel consolidation method to measure powder flow properties using a small amount of material Aiche Journal. DOI: 10.1002/Aic.15321 |
0.361 |
|
| 2016 |
Scicolone JV, Metzger M, Koynov S, Anderson K, Takhistov P, Glasser BJ, Muzzio FJ. Effect of liquid addition on the bulk and flow properties of fine and coarse glass beads Aiche Journal. 62: 648-658. DOI: 10.1002/Aic.15004 |
0.697 |
|
| 2015 |
Koynov S, Glasser B, Muzzio F. Comparison of three rotational shear cell testers: Powder flowability and bulk density Powder Technology. 283: 103-112. DOI: 10.1016/J.Powtec.2015.04.027 |
0.37 |
|
| 2015 |
Remy B, Kightlinger W, Saurer EM, Domagalski N, Glasser BJ. Scale-up of agitated drying: Effect of shear stress and hydrostatic pressure on active pharmaceutical ingredient powder properties Aiche Journal. 61: 407-418. DOI: 10.1002/Aic.14669 |
0.661 |
|
| 2013 |
Schrank S, Kann B, Windbergs M, Glasser BJ, Zimmer A, Khinast J, Roblegg E. Microstructure of calcium stearate matrix pellets: a function of the drying process. Journal of Pharmaceutical Sciences. 102: 3987-97. PMID 23983150 DOI: 10.1002/Jps.23707 |
0.314 |
|
| 2013 |
Scheibelhofer O, Balak N, Wahl PR, Koller DM, Glasser BJ, Khinast JG. Monitoring blending of pharmaceutical powders with multipoint NIR spectroscopy. Aaps Pharmscitech. 14: 234-44. PMID 23263752 DOI: 10.1208/S12249-012-9910-4 |
0.319 |
|
| 2013 |
Vasilenko A, Koynov S, Glasser BJ, Muzzio FJ. Role of consolidation state in the measurement of bulk density and cohesion Powder Technology. 239: 366-373. DOI: 10.1016/J.Powtec.2013.02.011 |
0.796 |
|
| 2013 |
Jain A, Metzger MJ, Glasser BJ. Effect of particle size distribution on segregation in vibrated systems Powder Technology. 237: 543-553. DOI: 10.1016/J.Powtec.2012.12.044 |
0.642 |
|
| 2013 |
Metzger MJ, Glasser BJ. Simulation of the breakage of bonded agglomerates in a ball mill Powder Technology. 237: 286-302. DOI: 10.1016/J.Powtec.2012.12.006 |
0.662 |
|
| 2013 |
Grigorov PI, Glasser BJ, Muzzio FJ. Formulation and manufacture of pharmaceuticals by fluidized-bed impregnation of active pharmaceutical ingredients onto porous carriers Aiche Journal. 59: 4538-4552. DOI: 10.1002/Aic.14209 |
0.33 |
|
| 2013 |
Gao Y, Glasser BJ, Ierapetritou MG, Cuitino A, Muzzio FJ, Beeckman JW, Fassbender NA, Borghard WG. Measurement of residence time distribution in a rotary calciner Aiche Journal. 59: 4068-4076. DOI: 10.1002/Aic.14175 |
0.447 |
|
| 2013 |
Metzger MJ, Glasser BJ, Patel B, Fox J, Sempuga BC, Hildebrandt D, Glasser D. Liquid Fuels from Alternative Carbon Sources Minimizing Carbon Dioxide Emissions Aiche Journal. 59: 2062-2078. DOI: 10.1002/Aic.13989 |
0.566 |
|
| 2013 |
Liu X, Muzzio FJ, Khinast JG, Glasser BJ. Fluidized bed drying of pharmaceutical materials: Moisture measurement and effects of particle size American Pharmaceutical Review. 16. |
0.314 |
|
| 2012 |
Nirmal Thyagu N, Vasilenko A, Voyiadjis A, Glasser BJ, Shinbrot T. Stuck in traffic: Patterns of powder adhesion. The European Physical Journal. E, Soft Matter. 35: 105. PMID 23085956 DOI: 10.1140/Epje/I2012-12105-Y |
0.358 |
|
| 2012 |
Schrank S, Hodzic A, Zimmer A, Glasser BJ, Khinast J, Roblegg E. Ibuprofen-loaded calcium stearate pellets: drying-induced variations in dosage form properties. Aaps Pharmscitech. 13: 686-98. PMID 22552931 DOI: 10.1208/S12249-012-9791-6 |
0.301 |
|
| 2012 |
Radl S, Brandl D, Heimburg H, Glasser BJ, Khinast JG. Flow and mixing of granular material over a single blade Powder Technology. 226: 199-212. DOI: 10.1016/J.Powtec.2012.04.042 |
0.492 |
|
| 2012 |
Metzger MJ, Glasser BJ. Numerical investigation of the breakage of bonded agglomerates during impact Powder Technology. 217: 304-314. DOI: 10.1016/J.Powtec.2011.10.042 |
0.64 |
|
| 2012 |
Remy B, Khinast JG, Glasser BJ. Wet granular flows in a bladed mixer: Experiments and simulations of monodisperse spheres Aiche Journal. 58: 3354-3369. DOI: 10.1002/Aic.13743 |
0.714 |
|
| 2012 |
Metzger MJ, Desai SP, Glasser D, Hildebrandt D, Glasser BJ. Using the attainable region analysis to determine the effect of process parameters on breakage in a ball mill Aiche Journal. 58: 2665-2673. DOI: 10.1002/Aic.12792 |
0.609 |
|
| 2012 |
Metzger MJ, Glasser BJ, Patel B, Hildebrandt D, Glasser D. Teaching process design through integrated process synthesis Chemical Engineering Education. 46: 260-270. |
0.501 |
|
| 2011 |
Siraj MS, Radl S, Glasser BJ, Khinast JG. Effect of blade angle and particle size on powder mixing performance in a rectangular box Powder Technology. 211: 100-113. DOI: 10.1016/J.Powtec.2011.04.004 |
0.51 |
|
| 2011 |
Vasilenko A, Glasser BJ, Muzzio FJ. Shear and flow behavior of pharmaceutical blends - Method comparison study Powder Technology. 208: 628-636. DOI: 10.1016/J.Powtec.2010.12.031 |
0.81 |
|
| 2011 |
Metzger MJ, Remy B, Glasser BJ. All the Brazil nuts are not on top: Vibration induced granular size segregation of binary, ternary and multi-sized mixtures Powder Technology. 205: 42-51. DOI: 10.1016/J.Powtec.2010.08.062 |
0.762 |
|
| 2011 |
Remy B, Khinast JG, Glasser BJ. Polydisperse granular flows in a bladed mixer: Experiments and simulations of cohesionless spheres Chemical Engineering Science. 66: 1811-1824. DOI: 10.1016/J.Ces.2010.12.022 |
0.709 |
|
| 2010 |
LaMarche KR, Metzger MJ, Glasser BJ, Shinbrot T. Shape-mediated ordering in granular blends. Physical Review. E, Statistical, Nonlinear, and Soft Matter Physics. 81: 052301. PMID 20866282 DOI: 10.1103/Physreve.81.052301 |
0.79 |
|
| 2010 |
Radl S, Kalvoda E, Glasser BJ, Khinast JG. Mixing characteristics of wet granular matter in a bladed mixer Powder Technology. 200: 171-189. DOI: 10.1016/J.Powtec.2010.02.022 |
0.539 |
|
| 2010 |
LaMarche KR, Muzzio FJ, Shinbrot T, Glasser BJ. Granular flow and dielectrophoresis: The effect of electrostatic forces on adhesion and flow of dielectric granular materials Powder Technology. 199: 180-188. DOI: 10.1016/J.Powtec.2010.01.006 |
0.822 |
|
| 2010 |
Radeke CA, Glasser BJ, Khinast JG. Large-scale powder mixer simulations using massively parallel GPUarchitectures Chemical Engineering Science. 65: 6435-6442. DOI: 10.1016/J.Ces.2010.09.035 |
0.468 |
|
| 2010 |
Remy B, Canty TM, Khinast JG, Glasser BJ. Experiments and simulations of cohesionless particles with varying roughness in a bladed mixer Chemical Engineering Science. 65: 4557-4571. DOI: 10.1016/J.Ces.2010.04.034 |
0.718 |
|
| 2010 |
Remy B, Glasser BJ, Khinast JG. The effect of mixer properties and fill level on granular flow in a bladed mixer Aiche Journal. 56: 336-353. DOI: 10.1002/Aic.11979 |
0.712 |
|
| 2009 |
LaMarche KR, Liu X, Shah SK, Shinbrot T, Glasser BJ. Electrostatic charging during the flow of grains from a cylinder Powder Technology. 195: 158-165. DOI: 10.1016/J.Powtec.2009.05.026 |
0.801 |
|
| 2009 |
Metzger MJ, Glasser D, Hausberger B, Hildebrandt D, Glasser BJ. Use of the attainable region analysis to optimize particle breakage in a ball mill Chemical Engineering Science. 64: 3766-3777. DOI: 10.1016/J.Ces.2009.05.012 |
0.661 |
|
| 2009 |
Remy B, Khinast JG, Glasser BJ. Discrete element simulation of free flowing grains in a four-bladed mixer Aiche Journal. 55: 2035-2048. DOI: 10.1002/Aic.11876 |
0.684 |
|
| 2008 |
Liu X, Metzger M, Glasser BJ. Granular and gas-particle flows in a channel with a bidisperse particle mixture Chemical Engineering Science. 63: 5696-5713. DOI: 10.1016/J.Ces.2008.08.011 |
0.728 |
|
| 2008 |
Remy B, Khinast JG, Glasser BJ. Characterization of granular flow in a bladed mixer using the discrete element method Aiche Annual Meeting, Conference Proceedings. |
0.595 |
|
| 2008 |
Metzger MJ, Glasser BJ, Glasser D, Hausberger B, Hildebrandt D, Khumalo N. Use of the attainable region (AR) analysis to optimize particle agglomeration and breakage operations Aiche Annual Meeting, Conference Proceedings. |
0.598 |
|
| 2008 |
Metzger MJ, Glasser BJ, Khumalo N, Hausberger B, Hildebrandt D, Glasser D. Optimization of particle agglomeration and breakage operations with the attainable region (AR) theory Aiche Annual Meeting, Conference Proceedings. |
0.587 |
|
| 2008 |
Remy B, Khinast JG, Glasser BJ. Numerical simulation of granular flow in a bladed mixer Aiche Annual Meeting, Conference Proceedings. |
0.611 |
|
| 2008 |
Liu X, Howley MA, Johri J, Glasser BJ. The hydrodynamic stability of a fluid-particle flow: Instabilities in gas-fluidized beds Chemical Engineering Education. 42: 179-184. |
0.811 |
|
| 2007 |
Liu X, Metzger M, Glasser BJ. Couette flow with a bidisperse particle mixture Physics of Fluids. 19. DOI: 10.1063/1.2741245 |
0.717 |
|
| 2007 |
LaMarche KR, Conway SL, Glasser BJ, Shinbrot T. Cellular automata model of gravity-driven granular flows Granular Matter. 9: 219-229. DOI: 10.1007/S10035-006-0028-9 |
0.799 |
|
| 2007 |
Liu X, Glasser BJ, Howley MA. Instability of bounded gas-particle fluidized beds Aiche Journal. 53: 811-824. DOI: 10.1002/Aic.11134 |
0.828 |
|
| 2007 |
Metzger MJ, Glasser BJ, Glasser D, Hausberger B, Hildebrandt D. Teaching reaction engineering using the attainable region Chemical Engineering Education. 41: 258-264. |
0.517 |
|
| 2006 |
Shinbrot T, Lamarche K, Glasser BJ. Triboelectrification and razorbacks: geophysical patterns produced in dry grains. Physical Review Letters. 96: 178002. PMID 16712337 DOI: 10.1103/Physrevlett.96.178002 |
0.78 |
|
| 2006 |
Caicedo-Carvajal CE, Glasser BJ, Shinbrot T. Granular flow transitions on sinusoidal surfaces Journal of Fluid Mechanics. 556: 253-269. DOI: 10.1017/S0022112006009542 |
0.441 |
|
| 2006 |
Conway SL, Liu X, Glasser BJ. Instability-induced clustering and segregation in high-shear Couette flows of model granular materials Chemical Engineering Science. 61: 6404-6423. DOI: 10.1016/J.Ces.2006.05.049 |
0.78 |
|
| 2006 |
Lekhal A, Conway SL, Glasser BJ, Khinast JG. Characterization of granular flow of wet solids in a bladed mixer Aiche Journal. 52: 2757-2766. DOI: 10.1002/Aic.10868 |
0.766 |
|
| 2006 |
Liu X, Glasser BJ. A parametric investigation of gas-particle flow in a vertical duct Aiche Journal. 52: 940-956. DOI: 10.1002/Aic.10704 |
0.526 |
|
| 2006 |
Liu X, Conway SL, Glasser BJ. Couette flows with a bimodal particle mixture Aiche Annual Meeting, Conference Proceedings. |
0.768 |
|
| 2006 |
Raffensberger J, Glasser B, Khinast JG. Effect of droplet-wake phenomena on mixing-sensitive pharmaceutical reactions Pharmaceutical Technology. 30: 66-80. |
0.749 |
|
| 2005 |
Howley MA, Glasser BJ. A comparison of one-dimensional traveling waves in inverse and normal fluidized beds Physica D: Nonlinear Phenomena. 201: 177-198. DOI: 10.1016/J.Physd.2004.11.013 |
0.792 |
|
| 2005 |
Conway SL, Lekhal A, Khinast JG, Glasser BJ. Granular flow and segregation in a four-bladed mixer Chemical Engineering Science. 60: 7091-7107. DOI: 10.1016/J.Ces.2005.03.008 |
0.758 |
|
| 2005 |
Raffensberger JA, Glasser BJ, Khinast JG. Analysis of heterogeneously catalyzed reactions close to bubbles Aiche Journal. 51: 1482-1496. DOI: 10.1002/Aic.10445 |
0.786 |
|
| 2005 |
Lekhal A, Khinast J, Glasser BJ. Granular flow of wet solids in a four bladed mixer Aiche Annual Meeting, Conference Proceedings. 3135. |
0.321 |
|
| 2004 |
Conway SL, Shinbrot T, Glasser BJ. A Taylor vortex analogy in granular flows. Nature. 431: 433-7. PMID 15386007 DOI: 10.1038/Nature02901 |
0.777 |
|
| 2004 |
Conway SL, Glasser BJ. Density waves and coherent structures in granular Couette flows Physics of Fluids. 16: 509-529. DOI: 10.1063/1.1637348 |
0.781 |
|
| 2004 |
Johri J, Glasser BJ. A bifurcation approach to understanding instabilities in gas-fluidized beds using a single phase compressible flow model Computers and Chemical Engineering. 28: 2677-2693. DOI: 10.1016/j.compchemeng.2004.08.003 |
0.74 |
|
| 2004 |
Lekhal A, Glasser BJ, Khinast JG. Influence of pH and ionic strength on the metal profile of impregnation catalysts Chemical Engineering Science. 59: 1063-1077. DOI: 10.1016/J.Ces.2003.12.009 |
0.313 |
|
| 2004 |
Wright PR, Liu X, Glasser BJ. A fluidized bed adsorption laboratory experiment Chemical Engineering Education. 38: 14-21. |
0.564 |
|
| 2004 |
Liss ED, Conway SL, Zega JA, Glasser BJ. Segregation of Powders during Gravity Flow through Vertical Pipes Pharmaceutical Technology. 28: 78-96. |
0.784 |
|
| 2003 |
Conway SL, Goldfarb DJ, Shinbrot T, Glasser BJ. Free surface waves in wall-bounded granular flows. Physical Review Letters. 90: 074301. PMID 12633230 DOI: 10.1103/Physrevlett.90.074301 |
0.727 |
|
| 2003 |
Raffensberger J, Koynov AA, Glasser BJ, Khinast JG. Influence of Particle Properties on the Yield and Selectivity of Fast Heterogeneously Catalyzed Gas-Liquid Reactions International Journal of Chemical Reactor Engineering. 1. DOI: 10.2202/1542-6580.1022 |
0.801 |
|
| 2003 |
Lekhal A, Girard KP, Brown MA, Kiang S, Glasser BJ, Khinast JG. Impact of agitated drying on crystal morphology: KCl-water system Powder Technology. 132: 119-130. DOI: 10.1016/S0032-5910(03)00056-1 |
0.307 |
|
| 2003 |
Johri J, Glasser BJ. Relating instabilities in gas-fluidized beds to those of single phase compressible flows Proceedings of the Asme Fluids Engineering Division Summer Meeting. 1: 359-364. |
0.741 |
|
| 2002 |
Goldfarb DJ, Glasser BJ, Shinbrot T. Shear instabilities in granular flows. Nature. 415: 302-5. PMID 11797003 DOI: 10.1038/415302A |
0.434 |
|
| 2002 |
Liss ED, Conway SL, Glasser BJ. Density waves in gravity-driven granular through a channel Physics of Fluids. 14: 3309-3326. DOI: 10.1063/1.1499126 |
0.784 |
|
| 2002 |
Howley MA, Glasser BJ. Hydrodynamics of a uniform liquid-fluidized bed containing a binary mixture of particles Chemical Engineering Science. 57: 4209-4226. DOI: 10.1016/S0009-2509(02)00361-5 |
0.796 |
|
| 2002 |
Johri J, Glasser BJ. Connections between density waves in fluidized beds and compressible flows Aiche Journal. 48: 1645-1664. DOI: 10.1002/Aic.690480808 |
0.765 |
|
| 2001 |
Glasser BJ, Goldhirsch I. Scale dependence, Correlations, And fluctuations of stressesin rapid granular flows Physics of Fluids. 13: 407-420. DOI: 10.1063/1.1338543 |
0.359 |
|
| 2001 |
Liss ED, Glasser BJ. The influence of clusters on the stress in a sheared granular material Powder Technology. 116: 116-132. DOI: 10.1016/S0032-5910(00)00392-2 |
0.775 |
|
| 2001 |
Lekhal A, Glasser BJ, Khinast JG. Impact of drying on the catalyst profile in supported impregnation catalysts Chemical Engineering Science. 56: 4473-4487. DOI: 10.1016/S0009-2509(01)00120-8 |
0.33 |
|
| 2001 |
Wright PR, Glasser BJ. Modeling mass transfer and hydrodynamics in fluidized-bed adsorption of proteins Aiche Journal. 47: 474-488. DOI: 10.1002/Aic.690470224 |
0.669 |
|
| 1999 |
Wright PR, Muzzio FJ, Glasser BJ. Effect of Resin Characteristics on Fluidized Bed Adsorption of Proteins. Biotechnology Progress. 15: 932-940. PMID 10514265 DOI: 10.1021/Bp990102X |
0.635 |
|
| 1998 |
Wright PR, Muzzio FJ, Glasser BJ. Batch uptake of lysozyme: effect of solution viscosity and mass transfer on adsorption. Biotechnology Progress. 14: 913-21. PMID 9841656 DOI: 10.1021/Bp980086O |
0.633 |
|
| 1998 |
Glasser BJ, Sundaresan S, Kevrekidis IG. From Bubbles to Clusters in Fluidized Beds Physical Review Letters. 81: 1849-1852. DOI: 10.1103/Physrevlett.81.1849 |
0.532 |
|
| 1997 |
Glasser BJ, Kevrekidis IG, Sundaresan S. Fully developed travelling wave solutions and bubble formation in fluidized beds Journal of Fluid Mechanics. 334: 157-188. DOI: 10.1017/S0022112096004351 |
0.597 |
|
| 1996 |
Goz MF, Glasser BJ, Kevrekidis YG, Sundaresan S. Traveling waves in multi-phase flows Advances in Fluid Mechanics. 9: 307-316. DOI: 10.2495/Afm960291 |
0.605 |
|
| 1996 |
Glasser BJ, Kevrekidis IG, Sundaresan S. One- and two-dimensional travelling wave solutions in gas-fiuidized beds Journal of Fluid Mechanics. 306: 183-221. DOI: 10.1017/S0022112096001280 |
0.506 |
|
| 1992 |
Glasser B, Hildebrandt D, Glasser D. Optimal mixing for exothermic reversible reactions Industrial & Engineering Chemistry Research. 31: 1541-1549. DOI: 10.1021/Ie00006A017 |
0.361 |
|
| Show low-probability matches. |
